Saltra LFP / Charger Guide
The charger must match the battery, not just the plug.
LiFePO4 charging depends on the correct voltage, current, connector, charge profile, and safety behavior. A wrong charger can create nuisance trips or damage risk.
Buyer pain point
Voltage confusion is common.
12V LiFePO4 packs are usually charged around 14.6V. 51.2V LiFePO4 packs are usually charged around 58.4V.
14.6V chargers
Used for 4S / 12.8V nominal LiFePO4 packs. Current rating should match the battery capacity, BMS, wiring, and use case.
58.4V chargers
Used for 16S / 51.2V nominal LiFePO4 packs. These are common in storage, inverter, and backup systems.
Current rating
Higher current charges faster, but it also increases heat and stress on connectors, wiring, and the BMS.
Connector choice
The connector must match the pack design. Saltra reviews connector style, cable size, polarity, and customer use case.
Saltra checklist
What Saltra checks before recommending a charger.
Build logic
Common charger path.
| Item | Why it matters |
|---|---|
| 12V / 4S LiFePO4 | Typically uses a 14.6V LiFePO4 charger. |
| 51.2V / 16S LiFePO4 | Typically uses a 58.4V LiFePO4 charger. |
| Fast charging | Requires checking BMS, wiring, connector, heat, and cell limits. |
Next step
Do not guess the build.
Tell Saltra what you are building, your target voltage, application, capacity goal, and whether you already have an inverter, charger, or BMS. We will use that information to recommend a cleaner battery build path before you buy.